HC-8100 SHOE CLEANING MACHINE WITH HAND DISINFECTION AND TURNSTILE
Best Shoe Cleaning Machine shoe cleaning machine shoe cleaning machine station malaysia shoe cleaning machine Hygiene equipment supplier
SHOE CLEANING MACHINE COME WITH HAND DISINFECTION AND TURNSTILE
MODEL NO: HC8100
Installation requirement:
. Machine must be installed indoor with flat and smooth floor.
. Water supply and drainage pipe or hose to connect.
. Power supply: 220VAC.
MODEL NO: HC8100
Working principle:
. Come with 2 brushes to clean the shoe/boot sole.
. Automatic sensor will detect the user and turn on the motor to rotate the brushes to clean the shoe soles.
. Motor will stop after the preset timing (5 - 60s).
. Come with 2 brushes to clean the shoe/boot sole.
. Automatic sensor will detect the user and turn on the motor to rotate the brushes to clean the shoe soles.
. Motor will stop after the preset timing (5 - 60s).
Installation requirement:
. Machine must be installed indoor with flat and smooth floor.
. Water supply and drainage pipe or hose to connect.
. Power supply: 220VAC.
Technical parameter:
Model HC-8100
Electric Control: Integrate Omrom/ Weidmuller /Chint
Cleaning model/water temperature: Circulate/cleaning with water /10-30¡æ
Function: Disinfect hand and clean sole before enter or exit the production area
Brush Material: Nylon
Disinfectant Container (L): 8L
Inlet part/pressure: Solenoid valve/8bar
Inlet connector: DN20 or 3/4'' female threaded
Water level controller: Floating ball valve DC24V
Drain type: Floor drain
Drainage connection: DN25
Start Mode: Start upon sensor induction, stop upon time out (1-60s)
Voltage: AC220 50Hz
Motor Power (W) 120
Rated Power (W) 680W
Disinfector: inductive spray disinfector
Tripod turnstile: Entrance after enforced disinfection
Main material: SUS304
Dimension: LXWXH (mm) 2100*1100*1950
Weight: 200 Kgs